Refelting Your Pool Table Cushions |
Getting Started with Recovering the Pool Table
cushions
|
This is
a look at at the underside of the pool table where the different bolts go
through the slate, and secure the pool table cushions. The one that is missing
is for the rail, and has already been removed...there are three bolts per pool
table cushion. There's no need at this point to remove the bolts that are
holding the slate. |
 |
Here you can see that the pool table cushions are
being removed for recovering the pool table with felt, and laid in place, so
that they don't get mixed up. |
 |
Here, my buddy Allen is using his handy-dandy staple
remover to pull the staples, and remove the old felt from the pool table
cushions. This is a pretty tedious task, and care should be used so that the
staples don't end up all over the floor where bare feet might find them
later. |
 |
Marking the rails so that you know exactly where
each one goes can be very helpful when you are ready to reassemble the pool
table. |
 |
| NEXT |
| |
 |
