|
Refelting Your Pool
Table
Stretching, and Securing the Felt |
With
one side secured, go to the other side...start in the middle, and pull it nice
and tight as you go. |
 |
| |
 |
| |
 |
Now
the corners. Cut off any felt that is obviously excess material, and wrap it
just a little way into the pocket to get a feel for it, and make sure you like
the way it looks. |
 |
Cut
a downward slit in the center of the pocket, and then one on both sides of the
first so that you have three slits. Make sure to start your slits below the
bottom edge of the slate, (1/2 inch) or you will end up with gaps in the felt
that will show on the edge. |
 |
|
 |
Once
you've made the cuts, just wrap the felt underneath, and press it firmly into
the glue on the bottom of the slate. |
 |
| NEXT |
| |
 |
|
